Changing your vehicle's motor oil is an important part of regular vehicle maintenance that helps to keep your engine running smoothly. Learn how to change the motor oil with this post by DFW Distributor in Irving.

Changing the motor oil is a crucial part of maintaining your vehicle and ensuring its smooth performance. Regular oil changes help remove contaminants, maintain proper lubrication, and prevent engine wear and tear. Not only that, but regular synthetic oil changes can help to keep your engine running smoothly for many years to come. In this post, we will guide you through the steps of how to change the motor oil, including what tools you'll need, how to drain the old oil, and how to refill the engine with new oil. By following these steps, you'll be able to perform this task yourself easily and efficiently, saving time and money on professional services and ensuring that your vehicle runs at its best.

Call DFW Distributor in Irving at (817) 821-2533 or visit AMSOIL's online store to 

How to Change the Motor Oil

Gather the Necessary Tools

First of all, gather the tools you will need to do the job properly. To change the motor oil, you will need an oil filter wrench, a drain pan, a funnel, a new oil filter, and the recommended type and amount of motor oil for your vehicle.

Warm Up the Engine

Start your vehicle and let it run for a few minutes to warm up the oil. This will help to loosen any debris or particles that may be in the oil, making it easier to drain. Be careful, though, as warming it too much can result in serious burns or injuries.

Locate the Oil Pan

The next step is simple but crucial: locate the oil pan under your vehicle. The oil pan is usually located on the bottom of the engine and is the metal container that holds the oil. If you need assistance, refer to your owner's manual or talk to a mechanic.

Place the Drain Pan

Place the drain pan under the oil pan to catch the used oil as it drains out. This will keep it from going everywhere and becoming a pain to clean up.

With the continued use of AMSOIL Signature Series 5W-30 Synthetic Motor Oil, the most effective synthetic oil in Irving, you can provide superior care for your engine and increase the time between changes.

Remove the Oil Drain Plug

Use the oil filter wrench to remove the oil drain plug from the oil pan. This plug is usually located near the bottom of the pan and has a round shape. Be prepared for the oil to start draining out as soon as the plug is removed.

Remove the Oil Filter

Locate the oil filter, which is usually located near the engine on the side or bottom. Use the oil filter wrench to remove the oil filter by turning it counterclockwise. Be prepared for some oil to spill out as you remove the filter.

Replace the Oil Filter

Clean the mounting surface and gasket on the engine where the oil filter was located. Apply a thin layer of oil to the gasket on the new oil filter and screw it onto the engine by turning it clockwise.

Is it time for a synthetic oil change? Call DFW Distributor in Irving at (817) 821-2533 or visit AMSOIL's online store to place an order for products that will keep your engine in top shape.

Replace the Oil Drain Plug

Replace the oil drain plug and tighten it securely by turning it clockwise with the oil filter wrench. Be careful, as being too harsh or too soft with it can break it. Avoid using your hands for this task.

Add New Oil

Use the funnel to add the recommended type and amount of new oil to the engine. Check the oil level with the dipstick and add more oil if necessary.

Start the Engine

Start the engine and let it run for a few minutes to circulate the new oil. Check for leaks and make sure that the oil level is still correct.

Dispose of the Used Oil

After changing the oil, dispose of the used oil properly. Do not pour it on the ground or in the drain, as it can harm the environment. Most auto parts stores and repair shops accept used oil for proper disposal.

Synthetic oil changes are key to keeping your engine in mint condition for longer. Call DFW Distributor in Irving at (817) 821-2533 or visit AMSOIL's online store to buy the products it needs to remain working as expected.